- [email protected]
- +1 ( 713 ) 417 - 7859
| Product/Service Name | Sales Description |
| 061-20210 | DIE ROLLER WITH BUSHING ASSY |
| 061-20217 SS | WRENCH BOLT (17-4) (REPLACES 061-20217 AND 061-20217-465) |
| 061-50234 | WEAR INSERT (S/N:230+) |
| 061-600100 | ELEMENT, FILTER, RTN LINE (HJPU6) 3MICR, 3 LBS/EA (SAME AS D11775) |
| 061-600113 | SEAL KIT, RTN FILTER (HJPU6), 0.3 LBS/EA (SAME AS D12204) |
| 061-670 | BEARING, LINKAGES (4/04), (REPLACES P/N 061-146) |
| 061-H18 RK | 3″ GRIP/TOP SEAL KIT |
| 061-H18S RK | GRIP/TILT CYL REPAIR KIT |
| 061-H37S 2 RK | HYDRAULIC CYL. REPAIR KIT, |
| 061-H45 | LP-4534 Valve, Needle with Check |
| 061-HV50 | RK SEAL KIT (2″ JH CYL) |
| 061-J20 RK | TORQUE CYLINDER SEAL KIT, REPLACES P/N: 061-H17 RK |
| 061-j20-rk | TORQUE CYLINDER SEAL KIT, MFG HAWK |
| 061-LTW P/S | POPPET PIN & SEAT SET |
| 061-M030 | ALIGNMENT COUPLER |
| 061-PRP568 230 | O RING |
| 612164 | INSERT FOR VARCO STYLE SLIP, 4-1/2″ X 4″ |
| 612169 | INSERT FOR VARCO STYLE SLIPS, 5-1/2″ X 5″ |
| 61235 | W-SERIES BURNOUT CLEANUP FILTER DRIER CORE (48 CUBIC INCHES) |
| 61617 | FILTER, LIQUID, EMERSON FLOW CONTROL ALCO 061617 UK-48 replace obsolete pn: WC48H |
| 6180 | RAW MATERIAL NUMBER FOR 21″ LAMP THAT FIT ON THE 4ETREME OR XL UNITS / DF PART # 06180 – 212606-00 |
| 062272-D-2 | SENSOR H2S 0-100 PPM, SENSALERT |
| 6308 | 06308, SCOTCH, Fine Line Tape 218 Green, 3/32 x 60yd |
| 06486091377 | CAP GASKET |
| 06689236376 | O-RING |
| 068Z3403 | 3/8″ X 1/2″ FLARE TE2 THERMAL EXPANSION VALVE WITH 1/4″ EXTERNAL |
| 06DA660092 | RC6800551, CRANKSHAFT HEATER |
| 06E1007 | Pncx Plug W/ Cap |
| 06E3007 | Pncx Coupler Socket W/ Cap |
| 06EA660168 | CRANKCASE HEATER 230V 180 WATTS |
| 71082401 | REPAIR KIT RUBBER VALVE FLOAT |
| 71082501 | REPAIR KIT RUBBER VALVE FLOAT |
| 71085601 | REPAIR KIT METAL VALVE FLOAT |
| 0725100400-01 | ELB 90 2MPT X SOC ORING |
| 0725100400-02 | BUTTRESS 4 X 2 |
| 0725100400-05 | Hub, Bottom, Filter, Media |
| 0725100400-06 | Lateral, Hub, Bottom |
| 73224 | DODGE, F4B-SCEZ-008L-PCR, BEARINGS |
| 07F46AC | POLYCARBONATE BOWL C/W METAL BOWL GUARD |
| 08-0053 | MOTION PRO USA TAPPET FEELER GAUGES RANGE: 0.004″-0.005″ |
| 08-1010-50 | DIAPHRAGM, PRIMARY, POLYURETHA |
| 08-1010-52 | DIAPHRAGM, BUNA-N |
| 08-1010-54 | Wilden |
| 08-1010-55 | DIAPHRAGM, PRIMARY, PTFE |
| 08-1012-52 | Diaphragm, Flap Valve, Buna N |
| 08-1040-55 | WILDEN, DIAPHRAM, PRIMARY FULL FLOW |
| 08-1065-57 | DIAPHRAGM, BU, FWS, FULL FLOW |
| 08-1080-55 | BALL, VALVE, TEFLON |
| 08-1080-58 | BALL, VALVE, WILFLEX |
| 08-11003 | T8/AAAAB/BNS/BN/BN/0014 |
| 08-1120-52 | SEAT, VALVE, BUNA |
| 08-1120-52-50 | SEAT, VALVE, BUNA,STALLION |
| 08-1120-56-72 | SEAT, VALVE, SANIFLEX,FOOD MST |
| 08-1125-20 | WILDEN, SEAT, VALVE |
| 08-1125-21 | FOR WILDEN PUMP MODEL P800 PLASTIC SEAT, VALVE, 800 ADV PLASTIC |
| 08-1185-52 | Valve, Flap, Buna N |
| 08-1195-52 | Pad, Flap Valve Hinge, Buna N |
| 08-1205-60 | FOR WILDEN PUMP MODEL P800 PLASTIC O-RING, (3.475 X .210) TFE/VIT |
| 08-1305-52 | Ring, Manifold Sealing, Buna N |
| 08-1371-60 | FOR WILDEN PUMP MODEL P800 PLASTIC O-RING, (4.350 X .210) TFE/VIT |
| 08-1395-52 | Gasket, Seat, Buna-N |
| 08-1401-52 | Gasket, Manifold, Buna N |
| 08-15156 | WILDEN AIR OPERATED DOUBLE DIAPHRAGM PUMP C/W MUFFLER (BRAHMA SERIES) PORT SIZE: 2″ NPT MATERIAL OF CONSTRUCTION WETTED PARTS: CAST IRON DIAPHRAMGS: BUNA-N VALVE BALLS: BUNA-N VALVE SEAT GASKET: BUNA-N **WATER/OIL USE** |
| 08-2000-07 | AIR VALVE ASSEMBLY, T8 |
| 08-2300-23 | END CAP W/ GUIDE, T8, TURBO |
| 08-2330-23 | END CAP W/O GUIDE, T8, TURBO |
| 08-2600-52 | GASKET, AIR VALVE, T8, TURBO |
| 08-2650-03 | RETAINING RING, AIR VALVE, T8 |
| 08-3100-20-225 | CENTER BLOCK, T8, POLY |
| 08-3210-55-225 | GLYD-RING, (.877 X.134) II, 08 |
| 08-3520-52 | GASKET, CENTER BLK, T8, TURBO |
| 08-3700-01 | PISTON, INNER, T8, (NON-PTFE) |
| 08-3800-03-07 | SHAFT, STRAIGHT,T8, NON-PTFE |
| 08-3811-03 | FOR WILDEN PUMP MODEL P800 PLASTIC SHAFT, PRO-FLO ADV, RUBBER (SUPERSEDES 08-3811-09) |
| 08-3894-99 | Sleeve, Pilot, Assembly |
| 08-4550-01 | PISTON, OUTER, (NON-PTFE) |
| 08-4550-21-500 | PISTON, OUTER, (NON-PTFE) |
| 08-6000-08 | SCREW, SHC, 5/16-18 X 2 1/4 |
| 08-6200-08 | SCREW, FHSC, 3/8-16 X 3 9/16 |
| 08-6550-08 | |
| 08-9804-55 | ELASTOMER KIT, WET, 2″/O/M/TNU // MFG: WILDEN (SUPERSEDES 08-9582-55) |
| 08-9815-55-201 | WILDEN, KIT ELAST, P800 PLASTIC, TWS |
| 08000-024L | SEPARATOR AIR/OIL- 024L SULLIVAN PALATEK |
| 0801-0007-00 | AMMETER, 0-2000ADC |
| 801061657 | PRE-FILTER ELEMENT CPFE 5 MICRON |
| 801141757 | PRE-FILTER ELEMENT CPFE 20 MICRON |
| 803004873 | CHARCOAL FILTER ELEMENT |
| 806110200 | ELEMENT BAG, #2 10-25 MICRON |
| 080X0540CP | 8 X 5 240-C/NP SGL SPHERE NITRILE EJ W/ PN10 METRIC FLANGES |
| 080X0640AVP | 8 X 6 240-AV/NP SGL SPHERE NITRILE EJ |
| 0811R | CLAMP, SS, PINCH-ON, DOUBLE EAR, 3/8″ |
| 81638 | CP404FQ72MLRA Motor is IEC Atex Motor is IP56 with PDTO Leads, II1 G EExde IIB T4 IC411. Explosion Proof Motor, Division 1 & 2, Class I, Group D; Class II, Group F & G with Certificate of Compliance |
| 81656 | MOTORMODUL PAN PT30/PT9 EATONG HERNIS |
| 81769 | POT. METER KIT, P/T PT36/PT30/PT9 EATON HERNIS |
| 820701 | DRILLMAX, RUBBER REPAIR KIT, 2F3R MODEL G, HNBR |
| 820901 | Rubber Repair Kit, Model G, Size 4R, (H2S/HT ) service *Interchangeable with part # 071082901* |
| 8253 | DEXTER RUSSELL 08253 SANI-SAFE 7″ STAINLESS CLEAVER HIGH-CARBON STEEL BLADE AND WHITE POLYPROPYLENE HANDLE |
| 8300 | JUSTRITE 08300 HORIZONTAL DRUM VENT, BRASS |
| 08363Q/B | 4″ E2 DEL VLV FF HALAR, VIKING |
| 851090250 | Pull Rod Assembly (Rev #1) |
| 8514 | SEAL, MECH, .625″, C/CE/B |
| 8579 | KIT, LEATHER & VINYL REPAIR KIT |
| 860101 | DRILLMAX, METAL REPAIR KIT, 4R MODEL G, HNBR |
| 872690000 | VALVE CORE, PH 5K GAS VIV C |
| 0881-10 | PART NUMBER 34-8743GLOVES, SIZE: 10, RESISTANT CUT-RESISTANT, GREEN/BLK RUBBER PADDED, MANUF. ELYSEE |
| 0881-11 | PART NUMBER 34-8743, GLOVES, SIZE: 11, RESISTANT CUT-RESISTANT, GREEN/BLK RUBBER PADDED, MANUF. ELYSEE |
| 0881-9 | PART NUMBER 34-8743, GLOVES, SIZE: 09, RESISTANT CUT-RESISTANT, GREEN/BLK RUBBER PADDED, MANUF. ELYSEE |
| 8902 | Justrite Brass Safety Drum Faucet, Internal Flame Arrester, Rigid, 3/4″ Npt Bung |
| 8929126 | Insert |
| 8929127 | INSERT |
| 08BH188AT | 08BH188AT Bd:188 Processor Smd Testedsell Hardware Kit Kxmic188At With This Board. (Per Gll 8/6/12 Sws) When Replacing The Processor You Must Check For Compatibility With The Display Board. If The Display Is Not Compatible With The Rs485 Serial Communic |
| 08BH188BXT | Control Board |
| 08BHFRDT | Circuit Board |
| 08BT168AT BD | PELLERIN MILNOR WASHER CONTROL BOARD FF742 |
| 08BTETSPT | SWITCH, BOARD E-TIMER |
| 08F25C2232ACFPH15 | SOLENOID VALVE |
| 08PSS1121T | POWER SUPPLY MICROPROCESSOR MPN NO. 08PSS1121T PART NAME PWR SUP 12W/OUT 85-264VAC/IN |
| 08PSS3401T | 08PSS3401X, 08PSS3401T, Power Suppy Board |
| 09-928 | 18″ CHEMICAL RESISTANT GLOVES, NEOPRENE, 10, 1 PR |
| 09.33.010.2601 | 10065420, Screw Terminal Male, Inseret HAN10 Connector |
| 09.33.010.2701 | Screw Terminal Female, Insert HAN10 Conn |
| 090-KB001-1000 | SEAL KIT, PISTON ~ 1- CYL, MILLER |
| 090130-001 | TC-611 BRASS SEAL RING |
| 090132-001 | TC-613 Brass Seal Ring |
| 0902-0100 | CHARGING & GAUGING ADAPTER ASSY |
| 0902-0101 | AIR CHUCK |
| 0902-0200 | VALVE CORE TOOL |
| 0915-06 | Lemon Pumice Hand Cleaner, 4.5 lb Canister |
| 916610 | PHOENIX CONTACT, CIRCUIT, THERMOMAGNETIC, 1POS, DIN RAIL MOUNTING |
| 9200 | CHIPPING HAMMER, 12 IN, 16 OZ HEAD, CHISEL AND PICK, PLASTIC HANDLE |
| 9220 | Chipping Hammer, 12 In, 20 Oz Head, Cross Chisel and Pick, Plastic Handle Lenco |
| 92404 | pba rx402 hernit pt cam pba rx402 |
| 93.63 | Finder, Fuse, 6A Solid State Relay For 5 x 20mm 250 V |
| 934511 | Rexnord 10067671 14 OZ. CARTRIDGE LTG GREASE GMAX LONG TERM GREASE |
| 941010 | Replacement Element for 1″ Muffler Model Type X10 |
| 941015 | KIT, REPLACEMENT ELEMENT FOR AIR DRYER |
| 941020 | Replacement Element for 2″ Muffler Model Type X20 |
| 9450 | 3M HOLDER PAD |
| 09451511560 | Modular Connector, IP20, Shielded, RJ45 Plug, 1 x 1 (Port), 8P8C, Cat6, IP20, Cable Mount |
| 095-043-156 | VALVE BODY |
| 095-073-001 | PILOT VALVE BODY ASSY |
| 0950-0068 | OUTLET CONNECTION FOR ESS4-125-992, USE FOR REGULATOR FOR OXGEN |
| 9652 | Rod, Extension, 36″ Long, With Fibreglass Material. Package 12 |
| 9653 | Rod, Extension, 24″ Long, With Fibreglass Material. Package 12 |
| 9733 | ACTUATOR ASSY, PNEUMATIC,R-1, VIKING |
| 09FN3001B03SP | FAN, PLASTIC EXTERNAL, 7 BLADE, 9.62IN OD, 2 IN BORE, BALDOR EXTERNAL FAN |
| 09FN3001D01SP | FAN, COOLING,EXT, 7.75 in OD BLD, PLAS |
| 09L84BA | LUBRICATOR 2″ L50-0C-G00-35 |
| 09R014A | MILNOR SWITCH INTERLOCK DOOR |
| 0FLU011.U | CARTRIDGE, AXIAL LEAD, AND SOCKET FUSE |
| 0K58-01400-0000 | Replacement for Life Fitness 93T Running Belt |
| 0SEAL2202-2.0VITON | seal, hmr, union, 2202, viton, 2” |
| 1 1/2 CD-SS | PARKER, STREET ELBOW, SS316, 1,500 PSI, 1-1/2″ MALE NPT X 1-1/2″ FEMALE NPT |
| 1 1/2 HP-SS | PARKER PLUG, HEX HEAD, 1.500 MNPT, 316 STAINLESS STEEL |
| 1 1/2 LF007M2-QT | Watts double Check Valve Assemblies, Series LF007 Lead Free* cast copper silicon alloy body construction Temperature Range: 33F – 180F (0.5DegC – 82DegC) Maximum Working Pressure: 175psi (12.1bar) Size: 1-1/2″ |
| 1″ | Blue Nylon Brushes 1″ – 25.4 mm For Tube Cleaner |
| 1-1/2 HHP-S | PARKER HHP, HOLLOW HEX PIPE PLUG, NPTF, 1-1/2″ NPTF (M) X 3/4″ C5 INTERNAL HEX SIZE, STEEL |
| 1-1/2″ BRUSH | BENT RADIATOR PAINT BRUSH |
| 1-1/8″ X 62′ MANILA ROPE | WITH THIMBLE ONE END |
| 1-5/8″ | Gauge |
| 1-7765M | FAN ELECTRIC MOTOR COOLING |
| 1.1/4 LF223 | WATTS – High Capacity Water Pressure Reducing valve (set 50 psig) |
| 1.520-916.0 | HIGH PRESSURE CLEANER, HD 4/9C, KARCHER, 420 L/H, 90BAR, 110V, 60HZ, 1PH |
| 1.90.900.006/0000 | RAFI LAMP EXTRACTOR FOR LAMP DIAMETER 10.4MM |
| 1/16″ Cable Ferrule | 1/16″ Cable Ferrule, Aluminum Crimping Loop Sleeve for Wire Rope, 300PCS |
| 1/2″ | Brush Brass for Tubes 1/2″ – 12.7 mm. With quick connect fitting. |
| 1/4″ | Blue Nylon Brushes 1/4″- 6.4 mm |
| 10 FNU-S | Flareless, Cap swivel, No. 10, Steel |
| 10 PNU-S | Flareless Plug Adapter, No. 10, Steel |
| 10 V5OX-SS | Parker |
| 10-1316 | BIFFI, SPRING, M012SR-60 OUTER CS FOR MORIN BIFFI TRIP TANK ACTUATOR VALVE |
| 10-1317 | BIFFI, SPRING, M012SR-20 INNER CS FOR MORIN BIFFI TRIP TANK ACTUATOR VALVE |
| 10-15L XHU86-S | EO SWIVEL ADAPTOR METRIC 15L X 5/8″ 37 DEG JIC PARKER |
| 10-24-100P | POWER SUPPLY UNIT, 50-60 HZ {Primary : 115/230VAC, 50-60Hz, 6.0 A/2.8A Secondary : DC 24Volt/10A Electronically Protected. Model No. SDN 10-24-100 |
| 10-650 | WURTEC WIRE ROPE TENSION GAUGE |
| 10-8 C5OX-SS | Parker |
| 100 DLFU 615-4 | EBARA PUMP: SUBMERSIBLE, 4 IN INLET, 20HP, 460V, C/W 15MTR CABLE, C/W EBARA COC |
| 100-0005-00 | FLIGHTCOM 5DX CLASSIC Headset |
| 100-02-4047-001 | AUTELDAC 4 RPLMT HNDST HNDST CORD AND CRADLE,STOWAGE DYNAMIC MICROP |
| 100-02-4047-021 | GAI-Tronics Spare Handset and Curly Cord For Auteldac4 |
| 100-02-4047-071 | Handset Spare Kit, Dynamic, With 0.75m Stainless Steel Cord, For GAITronics Auteldac 4 Hazardous Area Telephone. Manufacturer: GAI-1 |
| 100-60 | TRU-WATE FLUID DENSITY BALANCE PRESSURIZED |
| 100-70 | OFITE PRESSURIZED MUD BALANCE (SCH. B: 9016.00.0000) |
| 100-D115D11 | ALLEN-BRADLEY, IEC, CONTACTOR, 115A, 120VAC COIL |
| 1000 | VICTOR, CALCULATOR 8 LCD, 18MM |
| 1000-0105 | CAP VALVE |
| 1000-0106 | CORE, VALVE (OFFERING KOOMEY-TYPE EQUIVALENT) |
| 1000-4105 | ANTI-EXTRUSION RING |
| 1000000089 | Cable, USB 2.0M BK TW |
| 1000005409 | Belt,MARU3X314K for EGX-30A |
| 10000153 | Steril-aire Power Supply (10000154) with socket connectors |
| 10000153-1 | BALLAST STERIL AIRE |
| 1000022641 | Ring Nose-Guard, CS-20 |
| 100002806 | 316.10014, SEAL, PUSH ROD |
| 100002944 | HALLIBURTON 316.23391 SEAL & PACKING CARRIER HT-400 4 1/2″ Net Weight 7.90 LB (3.58 KG) Volume 4.72 CDM |
| 100003565 | FANN FOUR SCALE TRU-WATE PRESS. BALANCED MOD. 141 W/CASE, Measuring Range: lb/gal = 7-22 lb/sq in/1000ft of depth = 350-1150 lb/cu HS : 9016001000 Country of origin: USA |
| 100007 | 1/2HP 208-416/50/60 460/60 |
| 10001-1 | General Monitors Combustible Gas Sensor 10001-1 |
| 100022548 | GASKET NT100T NBR-HT |
| 100058768 | ROTARY CONTROLLER 24VDC |
| 1000781 | DBI BODY BELT |
| 100080446 | Oxford Black n’ Red A4 192 Pages Matte Casebound Hard-Back Ruled Notebook |
| 10010CG | |
| 100111017 | AO SMITH 100111017:K,USER INTERFACE MODULE (UIM) DISPLAY BOARD (replaces 9006240005, 315344-000, 197052-000) |
| 100118-001 | Die- contour |
| 100121-001 | Die- contour 1/2in x 1 1/4in |
| 100141 | ASSY, WHIP HOSE, COMPLETE, LUBCHEM |
| 10016209-001 | SEAL,PISTON SEAL,PISTON| |
| 100175-001 | VALVE, 4-WAY SPEED CONTROL |
| 10017CG | RET RING |
| 1002-E1029 | ORANGE RESEARCH 1002-E1029 CONTROL VALVE 3000PSI MAX 200BAR |
| 1002005 | 3M™ DBI-SALA® Web Tie-Off Adaptor |
| 100201 | OIL SAFE UTILITY LID, BLACK |
| 100209 | Fluid Storage Container, Drum, HDPE, 10 L |
| 1002209 | SEAL KIT, COMPLETE FOR HYDRIL GK 13.5/8″ 5K PSI |
| 1002486 | BC8921, LED MR-16, NFL20, DL Flood LED Light Bulb |
| 10026070 | 4760-1000-250, O-Ring Nitrile 10.000in O/D x 9.500in I/D x 0.250in C/S |
| 10028 | STENCIL, SET LETTERS INTERLOCKING BRASS 1 IN SIZE |
| 10028678-002 | Valve, Control, Spool, Max 175 psi. Legacy Item: 30154750-HE |
| 1003-0010-00 | TRANSFORMER 1.8KVA 600:240/120 |
| 1003-0013-00 | XFMR, POWER LIMIT SUPPLY |
| 1003-0046-00 | TRANSFORMER,600:31,3PH |
| 1003-0066-00 | PN: 10050566-001, TRANSFORMER 600/45V |
| 1003000 | Cross Arm Strap, Anchor Style Webbed Strap Pass-Through, Mounting Type Tie-Off |
| 100312905 | CLP,NW40,WG NUT CLOS |
| 1003263-02-BOP | PACKING UNIT GK 13-5M NBR |
| 10032735 | CERTIFIED LABRATORIES, CHEPREMALUBE, CERTIFIED PREMALUBE HEAVY DUTY MULTI-PURPOSE EXTREME PRESSURE NLGI #2 GREASE 14.8 OZ GREASE GUN TUBE |
| 100398 | PIN, HEAD ROLLER, 1-1/4″, 20″ STD TONG |
| 1004-0004-00 | POTENTIAL TRANS |
| 100488 | OIL SEAL C/C |
| 100493 | GEAR, PINION IDLER, 20″ STD MODEL B TONG |
| 10049838-001 | PILOT DEVICE, CONTACT BLOCK |
| 100499 | SHAFT, ROTARY IDLER, 20″ STD AND STD TONGS WITH 5/8″ PLATES |
| 100503 | GEAR, ROTARY IDLER, 20″ STD TONG |
| 1005041 | CROSBY SHUR-LOC HANDLE SWIVEL HOOK WITH BEARING, S13326AH, SIZE: 7/8″(22MM), WLL 34160LBS |
| 1005208-07 | BLADDER L-20 DIAPHRAGM 20 GAL RATED FOR 7,500 PSI MAX AND 300 DEG F |
| 1005208-07-BOP | HYDRIL DIAPHRAGM K 20 HYDROGENATED DURO 76 CMPD DIAPHRAGM, HYDROGENATED, WITH EXPIRY DATE LABEL, FOR HYDRIL K20-7500 PULSATION DAMPENER NOTE : SUPPLIER TO SUPPLIED ITEM WITH “EXPIRY DATE” NOT LESS THAN FIVE (5) YEAR UPON DELIVERY. |
| 1005213-BOP | HYDRIL STABILIZER DIAPH K20 INJECTION MOLDED STABILIZER, DIAPHRAGM, WITH EXPIRY DATE LABEL, FOR HYDRIL K20-7500 PULSATION DAMPENER . NOTE: SUPPLIER TO SUPPLIED ITEM WITH “EXPIRY DATE” NOT LESS THAN FIVE (5) YEAR UPON DELIVERY. |
| 10054-0101-000 | 90 degree swivel union – 750 npt |
| 10055 | General Purpose Anti-Seize, 1/4 lb., Brush-Top Can, Copper, Paste, Kopr-Kote, -65°F, 1800°F |
| 10056-0701-000 RU007 | inline swivel union – bearings – 1.25 NPT |
| 10057445 | ELEMENT REXNORD 50R STD STRAIGHT BORE |
| 1005845 | WELDMENT, DOOR SWITCH, KT13625, McCoy |
| 10058L05021 | LATCH, DOOR: RADIAL, FOR CHILLER DOOR, QA/QC CERTIFICATION: A MFG:KASON INTERNATIONAL TRADING | |
| 10059005003 | DEVICE: ROLLER STRIKE, FOR CHILLER DOOR, QA/QC CERTIFICATION: A MFG:KASON INTERNATIONAL TRADING |
| 1005930 | WELDMENT, DOOR SWITCH, KT13625, McCoy |
| 100604 | Dryer 12 1/2″ IMPELLOR (1/2″ BORE) |
| 10060936-001 | CELL, HYDR, BLAK-JAK |
| 10066871-001 | PB-ILLUM,120VAC/VDC,AMB.,LED |
| 100691 | DATCON METER, HOUR ENGINE |
| 100702 | 1/8″ X 1/8″ X 1-1/2″ KEY |
| 100811 | TAYLOR VALVE SEAL KIT FOR I-AU / I-BU / IC MUD VALVE, PART # SK-IC-1 • (1) BONNET O-RING • (2) PISTON (STEM) INSIDE BONNET O-RING • (1) PISTON HEAD O-RING • (1) BODY (UPPER CAGE) O-RING • (1) BODY (LOWER CAGE) O-RING • (1) TEFLON BACK-UP RING (PISTON) • (1) MAIN PISTON SEAL |
| 10083 | BURGESS GASKET PUMP CASING COVER FOR BURGESS MAGNA-VAC DEGASSER VACUUM TYPE, MOD 1000 HTS: 4016.93.0000 ORIGIN: USA |
| 10085K36 | Hand-Held Oil Dispenser, 16 oz. Capacity with Flexible Nozzle |
| 1008712 | ADC3030, JOYSTICK CONTROL 2-AXIS |
| 10089205 | CARABINER, STEEL, 4-3/16 IN. L, AUTO-LOCK MSA |
| 10089209 | MSA BRAND CARABINER, AUTO-LOCK, 9-1/2″ L, STEEL |
| 1008M | CRATHCO 1008M IMPELLER: STIRRER, 1.8110 IN DIA, FOR CRATHCO JUICE |
| 10090389-001 | Gauge/Indicator, Pressure, Pressure, Dry Dial |
| 100952 | HEAD ROLLER, 3″ X 1-1/4″ X 2-1/4″ |
| 100C16D10 | ALLEN-BRADLEY, IEC, CONTACTOR, 16 AMP, 120VAC COIL |
| 100G | 100G SLIICA GEL DESICANT, TYVEK PACK |
| 101 | DAHL FIILTER |
| 1010 | Silver, Stainless Steel, Basket Strainers, 2 in to 2 1/2 in, 1 1/2 in NPSM Connection Type |
| 101005 | OIL SAFE 5 LITRE / LITRE DRUM |
| 101010 | OILSAFE BLACK STANDARD PUMP |
| 1010241 | WORKSHOP SOLUTIONS SIT-STAND WITH SWIVEL SEAT STOOLS |
| 101062683 | ELBOW 90 1/2 FPT X 3/4 BAR PVC 101062683, CORAL SEA |
| 1010900002 | MANOMETER 0-10 BAR |
| 10111322-001 | FILTER, LOW PRESSURE, HYDRAULIC, 3.0″ O.D. X 4.5″ LONG LEGACY ITEM: 30173216-1 |
| 10115 | GREASE, KOPR-KOTE, 5 GAL PAIL – 47 LB |
| 10115836 | MSA V-Gard Visor – General Purpose, Polycarbonate (PC), Clear Tint |
| 10118 | HEX KEY SET, PIECES 18, S20 |
| 10118784-001 | OBSOLETE:PLC, I/O;Analog;In/Out;24 VDC; Legacy Item : 912015-002 |
| 1012 | Plusrite, 100 Watt – ED28- Pulse Start-Metal Halide Unprotected Arc Tube -4200K-ANSI M90/E-Mogule Base-Universal Burn-MH100/ED28/U/4K |
| 1012018 | A1370 REEVING LINK 13MM |
| 10121836-001 | BARRIER, INTRINSIC SAFETY;ZENER;CHANNEL 1;SUPPLY 15 V;VOC 15;SHRTCIR 150 MA;100 OHM RESISTANCE; DC VERSION; POSITIVE POLARITY. NOV Reference Item: 951540-114 |
| 10122 | SAE/METRIC L-SHAPED HEX KEY SET, 22 PCS, EKLIND |
| 10126-2-4 | Steel Fitting, 1/8″ NPT Male |
| 10127371-001 | DIAPHRAGM, ACTIVE; HYD COMPRESSION LC; 8 IN^2, MATL ELASTOMER, THK 0.95 IN (NOV REFERENCE ITEM: E358-200) |
| 10128 | RIG A LITE Safety Cable Assembly, 4FT with Clip, Stainless Steel For Lighting Fixture |
| 10128R | CABLE, SAFETY WITH SS CLASPS/CRIMP/CARABINEER WITH SCREW NUT TYPE, 4 FT LONG, 250LB RATING, ATTACHED METAL ID TAG, WITH CERTIFICATES |
| 1012Q01-010 | CARTRIDGE LUBRICANT |
| 10149 | STENCIL, SET LETTERS AND FIGURES 1-1/2 IN BRASS INTERLOCKING |
| 10153 | 3 inch Stencil Let. & Num. 92 pc Set |
| 10155102 | ACCUM. 1 GAL. 6K BLADDER KIT SS STEM |
| 10160011211 | BOARD , PRINTED CIRCUIT, POWER SUPPLY, FO |
| 1017001971 | NETWORK ASSEMBLY DVDT VARCO |
| 10177-12-12C | 46PCHF10177-12-12C |
| 10180 | GAUGE, VACUUM, GAUGE ONLY, NO CERTS. 0-30” (0-760MM) MERCURY HTS: 9026.20.0000 ORIGIN: USA |
| 10181522CC | LOW PRESSURE GAUGE -30/0/70 CBM NPT 10181522CC, CORAL SEA |
| 10181523CC | LOW PRESSURE GAUGE 0-70 CBM NPT, , CORAL SEA |
| 10181524CC | BACK PRES. REGULATOR GAUGE 0-1500 PSI, , CORAL SEA |
| 10181532CC | GAUGE -30/0/70 CBM |
| 10181533CC | GAUGE 0-160PSI/BAR/KG 1/4 |
| 10181534CC | GAUGE 0-2000 CBM |
| 1018155CC | GAUGE 0-160 CBM |
| 101CY-4-2 | PARKER |
| 101F-3939 | AUTOCLAVE PARKER.101F-3939 CONING BLADE (2/SET) 1/4 & 5/1 |
| 101HP | FITTING-MALE CRIMP,101HP,PARKER, 1/4NPT, 3-16ID,F/ REMOTE CONTROL PANEL |
| 102.19.03 | Main shaft, travelling block YC-450. Ideal rig, National oilwell varco, 10” shaft |
| 102000 | OilSafe Black Standard Pump |
| 1020K11 | Grinding, Sanding, and Finishing Coolant Mineral Base Oil, 1-gal Jug |
| 1021363 | SEAT 5.000-7.5M SS LP NIT 90 PSL-1 AND PSL-2 |
| 102260 | MAXIWASH, PRIMUS SWITCH |
| 10250T201 | INDICATOR LIGHT CUTTLER HAMMER |
| 10250TC1N | LENS RED CUTTLER HAMMER 30MM |
| 102562 | SEAL KIT, RINEER 15 & 20 SERIES |
| 102626 | RELAY VALVE-R-12 BENDIX |
| 10294 | CAP, RADIATOR, 15 PSI, SWIV-EL DESIGN STANT CORP |
| 10299-N | 299-N, STUD |
| 103-892-67 | RETAINER RING, MFG: ROGERS OIL TOOLS |
| 103-925-12-1 | SHIFTING CYLINDER ROD, MFG ROGERS OIL TOOLS (REF PART NUMBER 8546-6140-6) |
| 103-925-12-2 | SHIFTING CYLINDER BODY, MFG: ROGERS OIL TOOLS |
| 103004C | DENSO TAPE 2″ X 10M |
| 103111FAFA2ACG | METER, 0-2000ADC |
| 103632 | Inspection Record Tag, Fire Ext, 3inH, PK10 |
| 103678-D | TACHOMETER, 3000 RPM W/HOURMETER ALTERNATOR SIGNAL, 124A30HBD, DATCON |
| 1037 | LINCOLN GREASE GUN, 3,000 PSI |
| 1038 | 24″ STRAIGHT RUBBER FLOOR SQUEEGEE WITH HANDLE, BLACK |
| 10383654-015 | GLAND, M20, ARMORED POTD |
| 1039092 | APPLICATOR, VSP VITALIFE, BACKPACK SPRAYER, 4 GAL CAPACITY |
| 10395-1 | SPLASH GUARD FOR HEAD SENSOR, GENERAL MONITORS |
| 10399-46-1 | CPMF CASING, 6X5X14 GASKET |
| 104-1002-006 | Char-Lynn LSHT Geroler Hydraulic Motor, 742 RPM, 20 gpm |
| 10400 | Wilton All-Weather Outdoor Vises with Swivel Base, 3-1/2″ Jaw Width, 5″ Jaw Opening, 4-1/2″ Throat Depth |
| 10400-03718 | 7/8″ G-4263 4-3/4mt GALVANIZED WIDE MOUTH LIFTING BOLT TYPE ANCHOR SHACKLE GREEN PIN HOLLAND MOUTH OPENING- 2-15/32″ PIN DIAMETER- 1″ WT 4.59 LBS |
| 10400-03719 | 1″ G-4263 6-1/2mt GALVANIZED WIDE MOUTH LIFTING BOLT TYPE ANCHOR SHACKLE GREEN PIN HOLLAND MOUTH OPENING- 2-15/16″ PIN DIAMETER- 1-1/8″ WT 6.92 LBS |
| 10,400.00 | HAMMER UNION, 4″ KEMPER, FIG 100, NPT |
| 10400105 | CAD CONTROLS SYSTEMS, ACCUMULATOR 15-GAL BLADDER, 3K CS STEM |
| 104180 | ELEMENT, FILTER CARTRIDGE STYLE 25 MICRON 1.62 IN OD X 3.89 IN OD X 9.25 IN LENGTH |
| 104203402 | 14678, FLEXBAR PRECISION TILT & SWIVEL GRINDING |
| 104317 | 5 MICRON ELEMENT |
| 104326 | FILTER BOWL SERVICE KIT |
| 104327 | SERVICE KIT |
| 104339 | LUBRICATOR BOWL SERVICE KIT |
| 1043T61 | CRANE BUMPER WITH RETAINING LOOP, 5″ OD, 7-1/2″ HIGH |
| 104504 | INGERSOLL RAND ARO, GAUGE, EXTERNAL, PORT 1/4″, DIAL SIZE 2″ DIA, RANGE 0-160PSI, CASE-PLASTIC, LENS POLYCARBONATE |
| 10479339 | 24 VOLT, 50MT STARTER MOTOR |
| 1048560001 | KJR BEACON LED LATHE LAMP |
| 104B240F11BC | Procon Series 4 Self-Priming Rotary Vane Pump – 240 GPH, 99 PSI, 1725 RPM |
| 104HA4 | CARDBOARD LABEL WITH WIRE/STRING ( PACK OF 1000 UNITS) |
| 1050100000 | Weidmuller, W-Series, End plate, Separation plate |
| 10507-220-D | AMERICAN BEAUTY RESISTANCE SOLDERING SYSTEM, 1100WATT-STANDARD CAPACITY PLIER STYLE WITH HARDWIRED FOOTSWITCH & UK CORDSET (BS 1363), 220-240 VAC |
| 105159 | AMERICAN BEAUTY_REPLACEMENT ELECTRODES CARBON BLOCKS FOR SM PLIERS, 2PCS/PKT |
| 105258 | AMERICAN BEAUTY RESISTANCE SOLDERING HANDPIECE, STANDARD CARBON PLIER STYLE |
| 10540 | JURA WE6-WE8 GROUNDS CONTAINER TRAY |
| 10541 | JURA WE6-WE8 COFFEE GROUNDS CONTAINER |
| 105416TC | Rice Lake Class M1 Metric Grip Handle Weights, 20 kg W/Accredited Certificate |
| 10554 | SLICE AUTO RETRACT KNIFE |
| 10562 | Stainless Steel Hex Key Bits 3.0 mm |
| 10564 | Stainless Steel Hex Key Bits 4.0 mm |
| 10565 | Stainless Steel Hex Key Bits 5.0 mm |
| 10566-1 | Clamp |
| 1056SE-4 | ALEMITE 10,000 PSI HEAVY DUTY HIGH PRESSURE GREASE GUN C/W 12″ FLEXIBLE GREASE HOSE |
| 10576A | NEIKO 10576A Handheld Electric Engraver Tool, Etching Tool, 120V, Tungsten Carbide Tip, Electric Engraving Pen for Metal, Wood, Glass, & Plastic, Engraving Machine Scriber, Customizer Etcher Stencils |
| 10586 | Stainless Steel Hex Key Bits 6.0 mm |
| 105903-053 | CORE, 4 INCH RIBBON PACKAGE OF 50 FOR ZEBRA ZD620 |
| 10594 | BRAKE SHAFT, FOR AIRWINCH MODEL-FA5IMR24MKJIU123P |
| 105B2-220-D | AMERICAN BEAUTY_RESISTANCE SOLDERING POWER UNIT, 1100WATT SELECTIVELY-VARIABLE (23 SETTINGS) WITH HARDWIRED FOOTSWITCH & UK CORDSET (BS 1363), 220-240VAC |
| 106-330 | TRANSDUCER 2000 |
| 1060-094 | Brass Slotted Round Head Machine Screw Kit w/ Nuts & Washers – #6-32 to 1/4″-20 |
| 10600 | HAMER UNION, 6″ KEMPER, FIG 100, NPT |
| 1061L | Brass and Stainless Steel Pedal Valve Repair Kit For Use With All SANI-LAV Pedal Valves |
| 106344 | Brady Polystyrene Right to Know Compliance Center with Two Binder, 20″ H x 14″ W x 6 1/4″ D, Yellow on Red |
| 10640 | DUALCO COUPLER HTS: 8413.11.0000 ORIGIN: USA |
| 10643-16-12 | PARKER, 1” JIC 37° SWIVEL STRAIGHT FOR HOSE ID 3/4″ |
| 10643-4-4 | PARKER, 1/4 JIC 37° SWIVEL STRAIGHT FOR HOSE ID = 1/4″ |
| 10643-6-4 | PARKER, 3/8 JIC 37° SWIVEL STRAIGHT FOR HOSE ID =1/4″ |
| 10643-6-6 | PARKER, 3/ 8 JIC 37° SWIVEL 45â ° ELBOW FOR HOSE ID = 3/ 8″ |
| 10643-8-6 | PARKER, 1/2 JIC 37° SWIVEL STRAIGHT FOR HOSE ID =3/8″ |
| 10643-8-8 | PARKER, 1/2 JIC 37° SWIVEL STRAIGHT FOR HOSE ID =1/2″ |
| 10646336-001 | RING, PROPRIETARY;WEAR;IMO;OD 2 IN;WIDTH: 0.50 IN, WALL THK:0.120/0.125 IN;MATL NYLON |
| 10673-32-32 | END, HOSE FEMALE JIC 37 DEG SWIVEL, PARKER |
| 10682045-036 | O-RING;-226, SAE AS568;MATL BUNA-N (NITRILE NBR);ID 2 IN;OD 2.24 IN;THK 0.12 IN |
| 10693 | 1″ NF40050 Brass |
| 10696 | ROBINAIR RATCHET W/4 SIZES |
| 106CY-4-2 | PARKER |
| 106HP43 | FITTING-JIC CRIMP HP,106HP-4-3,PARKER,F/ REMOTE CONTROL PANEL |
| 107-158 | SCREW BRAKE ADJUSTING, INGERSOLL RAND |
| 107-159 | YOKE BRAKE, INGERSOLL RAND |
| 107004 | PLC POWER SUPPLY, 120/230VAC, 10A @ 24VDC |
| 107005 | PLC CPU MODULE, “RIG SPECIFIC” PRE-PROGRAMMED |
| 107006 | PLC MEMORY CARD, “RIG SPECIFIC” PRE-PROGRAMMED |
| 107007 | PLC I/O INTERFACE EXPANSION MODULE |
| 107008 | PLC I/O RELAY INTERFACE MODULE |
| 107009 | PLC I/O MODULE, 8 CH ANALOG INPUTS |
| 107010 | PLC I/O MODULE, 8 CH ANALOG OUTPUTS |
| 107011 | PLC I/O MODULE, 4 IN/2 OUT ANALOG |
| 107012 | PLC I/O MODULE, 16 CH 24VDC DISCRETE INPUTS |
| 107013 | PLC I/O MODULE, 16 CH RELAY OUTPUTS |
| 1074508 | INTERTAPE® 48MM X 54.8M MEDIUM GRADE FLATBACK TAPE, BROWN, 24/CS ROLL ITEM : 1074508 / MODEL : 71676 (PACKS OF 24) |
| 107516 | BENDIX |
| 1075259 | CROSBY HG4060 7/8″ RIGHT HAND TURNBUCKLE LOCKNUT |
| 1075277 | CROSBY HG4060 1″ RIGHT HAND TURNBUCKLE LOCKNUT |
| 1075311 | CROSBY HG4060 1-1/4″ RIGHT HAND TURNBUCKLE LOCKNUT |
| 1075632 | CROSBY HG4061 7/8″ LEFT HAND TURNBUCKLE LOCKNUT |
| 1075650 | CROSBY HG4061 1″ LEFT HAND TURNBUCKLE LOCKNUT |
| 1075696 | CROSBY HG4061 1-1/4″ LEFT HAND TURNBUCKLE LOCKNUT |
| 1076 | REPAIR KIT |
| 107963-7 | THROTTLE CONTROL, CUMMINS ARENS TOP MOUNT 2010 |
| 108-1205 | 1ea of 14-band belts |
| 108-130MFD | Start Capacitors Model: 108-130MFD 330v 50/60 Hz Electric Motor HVACR New |
| 10800 | HAMMER UNION, 8″, KEMPER, FIG 100, NPT |
| 1080367 | FLTR 240 XD CONTAINS ADDITIVES &CGP PURA/PURADYN |
| 10809 | TRIM,PNEUMATIC REL,GALV, VIKING |
| 10829X001 | SERVICE KIT |
| 1082K7 | FLEXIBLE NOZZLE WITH SPRING GUARD, FOR MANUAL AND AIR-POWERED GREASE GUN, 12″ LONG |
| 1082K8 | Flexible Grease Nozzle with Spring Guard, 18″ Long |
| 108308 | MCKISSICK SNATCH BLOCK TYPE 421 WIH SHACKLE SHEAVE DIA 8″ WLL 1.5 TON, BEARING CODE BB, WIRE SIZE 3/4″-7/8″ |
| 1084C001 | US 1084C001 PowerShot ELPH 190 Digital (Black) |
| 10901 | GASKET, STOP, PLATE 17-1/2 ID |
| 1091K5 | COUPLER, HYDRAULIC GREASE GUN 1/8 IN NPT F WITH BUILT CHECK VALVE. 4 AW BALL |
| 109869 | BENDIX HARNESS |
| 10A20XSN.2400 | HOSE ¼” 2SN C 90 ¼” C45 ¼” L=2400 |
| 10A20XSN1.3700 | HOSE ¼” 1SN C 90 ¼” C 90 ¼” L=3700 |
| 10A242 | AIR HOSE, MAX. WORKING PRESSURE @ 70 F 300 PSI, HOSE INSIDE DIA. 3/4 IN, HOSE LENGTH 450 FT |
| 10BF10 | PARKER BACK FERRULE .5/8″ TUBE |
| 10BM-299-21 | BENDIX STARTER DRIVE |
| 10C-ESN | Nut, 5/8″ NC Elastic Stop, Model: 7SC; King Oiltools (328.335.0027C) |
| 10C28-B | 5/8″ NC Hex HD x 3-1/2″ Bolt, Model: 7SC; King Oiltools (328.335.0026SP) |
| 10C353 | BARBED HYDRAULIC HOSE FITTING, FITTING MATERIAL BRASS X BRASS, FITTING SIZE 1/4 IN X 1/4 IN |
| 10FF10 | PARKER FRONT FERRULE .5/8″ TUBE |
| 10FN3001A01 | FAN, COOLING EXTERNAL |
| 10H446666YBSE | VALVE, BALL, 1″ NPT, 3000 PSI |
| 10H446666YBSE c/w COC | VALVE-WORCESTER-10H446666YBSE-10H44, 6666YBSE-1″-4500–SS-316SS-NPT c/w COC |
| 10HK446666YVSW | WORCESTER BALL VALVE, 10HK 44T6 6YVSW, 1″ HIGH PRESSURE, STAINLESS BODY/PE/BALL/STEM, LUBETAL SEATS, VITON BODY SEALS, LKG HANDLE |
| 10L40 | GOULDS |
| 10MA8N | PARKER ADAPTER .5/8″ TUBE X .1/2 NPT |
| 10MB-KINGSWIVEL | 10MB SWIVEL (INCLUDES SWIVEL, HOSE CONNECTION, 4.5″ EU-8 LEFT HAND PIN LOWER CONNECTION WITH BAIL & BUMPER, 4.5″ REG LEFT PIN LOWER CONNECTIONS SUB |
| 10MRT8N | PARKER TEE TUBE .5/8″ X .1/2″ NPT |
| 10N669 | REFRIGERATOR, 10N669, GRAINGER, 20 5/8 IN OVERALL WIDTH, 4.4 CU FT CAPACITY, 115V 60HZ |
| 10ORM25MNS | # 10 O-RING X 0.25 NPT MALE |
| 10ORM38MNS | #10 O-RING MALE X 3/8″ NPT MALE |
| 10R328 | SPIRAL NOTEBOOK,UNIVERSAL GRID |
| 10TUR8 | PARKER REDUCER TUBE .5/8 X .1/2 |
| 10U042 | PLIERS, WATER PUMP V PUSH BUTTON 1-1/4 IN MAX JAW OPENING 6 IN OVERALL LG 11 JAW POSITIONS |
| 10U114 | FENCING CUTTERS,8 IN OVERALL LENGTH,STRAIGHT CUT CUTTING ACTION |
| 10U177 | 7 2/25 INL CRIMPER, 29 TO 5 AWG , 10U177 |
| 11-02013 | BREYDEN 203-3 LACING |
| 11-115 | Nut Wrench Type “T” & “C” Safety Clamp (replaces 99611 & 99611-1) |
| 11-38683N | ELECTRIC HEATING ELEMENT, 30650W @ 480V/ 23010W @ 240V NOTE: RTE MUST BE GENERATED TO ADD THE V SHAPED JUMPER. (1) V-SHAPED JUMPER AND THEN (2) OF REGULAR JUMPERS |
| 11-5023S000 | Valve Assy Outlet SS w/Buna Seal |
| 11-52 | ALLEN HEAD CAP SCREW |
| 11-801-10 | GLOVE, NYLON, BLACK FOAM NITRILE COATING, KNIT WRIST CUFF, X-LARGE, SIZE 10 (PACK OF 12) ANSELL HYFLEX 11-801-10 / MECH & ELEC USE |
| 11-801-11 | GLOVE, NYLON, BLACK FOAM NITRILE COATING, KNIT WRIST CUFF, XX-LARGE, SIZE 11 (PACK OF 12), ANSELL HYFLEX PN: 11-801-11 / MECH & ELEC USE |
| 11-988 | BLADE, UTILITY KNIFE; 1-7/8 IN, 100/PK, ROUND POINT |
| 11-TPL52 | PADLOCK, 25MM 1″ SMALL MINI SOLID BRASS WITH 2 KEYS |
| 110 | SCREW, HEX, 1/4 – 20, 2 1/4, STEEL, GR08 |
| 110-3706 | HEPA Filter,Plastic |
| 110061-326 | SEAL PISTON |
| 11010-23 | Element, Top Plate, 480V O/S 2000W MANUFACTURER – Lang |
| 11010-24 | RANGE ELEMENT |
| 11010-24. | Element, Top Plate, 480V I/S 3000W MANUFACTURER – Lang |
| 1101254 | RETRIEVAL FULL BODY HARNESS, VEST STYLE, UNIVERSAL, YELLOW |
| 110191-501 | BLADDER RESERVOIR ASSEMBLY 5 GALLON |
| 1102000 | 3M DBI-SALA Delta Vest Style Harness, Back D-Ring, Tongue Buckle Leg Straps, Universal, Navy/Yellow |
| 1102090 | DBI/SALA, 1102090, HARN QC VD 2D D3 |
| 11,02,090.00 | 3M™ DBI-SALA® Delta™ Vest Climbing Safety Harness 1102090, Universal |
| 11021011788 | Rear Mirror for Toyota Forklift, 8″ x 4.5″, 7/8FG/FD 58720-23320-71, Brand: CXRacing |
| 1104-01 | 0803040BM, 1104-01 DESCO 111 HS LUBE 40# METAL |
| 11040-07 | Element 32Oven 480V I/S 1Kw for Lang |
| 11040-08 | Element 32Oven 480V O/S 1Kw for Lang |
| 11050-29 | Element, 36, Oven, 480V O/S 1800W MANUFACTURER – Lang |
| 11050-30 | Element, 36 Oven, 480 V, O/S, 1200 W MANUFACTURER – Lang |
| 1105826 | 3M™ DBI-SALA® Delta™ Derrick Harness, Small |
| 1107646953 | FLOW METER 15GPM T/S |
| 1107800 | FULL BODY HARNESS, 420 LB, YELLOW, LARGE |
| 1107801 | SAFETY HARNESS DELTA SIZE- L FOR CLIBIMNG |
| 1108125 | Bosn chair harness front & back D-ring w added 18 in ext tongue buckle belt pad and side D-rings seat sling w rigid seat board tongue buckle legs (LG) |
| 1108127 | 3M™ DBI-SALA® Delta™ Bosun Chair Harness 1108127, Medium |
| 110832-997 | VALVE |
| 11084101 | SAUER DANFOSS ACTUATION VALVE PROPORTIONAL |
| 1108526 | Full Body Harness, 420 lb, Blue – M |
| 1108600 | EXOFIT HARNESS VEST STYLE BK & SIDE D-RINGS |
| 1108651 | HARNESS QC VD 2D MED EXOFIT PAD BELT S STRP BLU/GRY |
| 11090-16 | ELEMENT OVEN |
| 1109229 | HARNESS: TYPE:VEST-STYLE POSITIONING/CLIMBING, SZ:LARGE, CLR:BLUE/GRAY, LOAD_RATE:190KG, MDL:EXOFIT STRATA |
| 111-7927 | LAMP-INSPECTION, LED, INSPECTION LAMP RECHARGEABLE |
| 1110377 | 1110377, ExoFit XP Vest-Style Retrieval Harness, Blue, L |
| 1110990 | SAFETY HARNESS DELTA UNIVERSAL |
| 11120-14 | Heating Element – 480V/2600W for Star |
| 1112547 | FULL BODY HARNESS WITH RETRIVAL LINES FOR CSE. 3M DBI SALA FUNCTION TO: FULL BODY HARNESS FOR VERTICAL CONFINED SPACE, LARGE SIZE |
| 1113R | CLAMP, SS, PINCH-ON, DOUBLE EAR, 1/2″ |
| 11141 | BYRON JACKSON,HINGE PIN |
| 1115-PL | 5GAL PAIL LINER HD |
| 111503-4 | SWITCH |
| 11171448 | 1 U 19 MOUNT CABLE ROUTING PANEL WITH D RINGS |
| 11180 | GREENLEE REPLACEMENT CUTTER FOR DEBURING TOOL (PACK OF 3) |
| 111940 | ECKEL 1/2″ X 1.1/4″ X 3.1/2″ TONG DIES |
| 11220 | 0607000453, CLEVIS INGERSOLL RAND – CPN 71072318 |
| 112225 | 5S Tool Box Shadow Foam Organizers (2 Color) FITS Craftsman Model# 112225 TOP Box (10.75″ x 18.125″, Black Top/Red Bottom) |
| 112431-RF | AMPHENOL_COAXIAL CONNECTOR, BNC COAXIAL, STRAIGHT BULKHEAD JACK, SOLDER, 50 OHM, PHOSPHOR BRONZE |
| 1125N-010 | FILTER, FUEL |
| 11340 | CAT PUMPS, O-RING, BEARING COVER |
| 113686000-00753168 | WALDMANN ALD LED TASK LIGHT, 100-240V, 5000K, DIMMABLE, IP20, WITH CLAMP |
| 113713000-0080525 | Waldmann TEVISIO LED, 31″ Reach, 3.5D + 8D, 13W, 5000K, Dimmable, with Segment Switching |
| 1139167 | O-RING, 65MM OD X 3.1MM CS HNB |
| 114110-76910 | VALVE,YANMAR,114110-76900,ASSY ,F/O CUT 1141107690 |
| 1141659 | O-RING, 60MM OD X 3.1MM CS HNB |
| 1143800 | O-RING, 55MM OD X 3.1MM CS HNB |